MIC-ZG is an international OEM manufacturer. We are ready for factory audits and video calls at any time.
From design to production. We provide feasibility analyses, market research and trial launch for each injection mold. We are committed to helping customers win the market in a real sense, rather than simply OEM plastic production. We will customize at least 3 solutions and offer you a $500 discount on your first mold.
Confidentiality Agreement | Collaborative Office Systems | Videoconferencing | Fabrication in China | Win of the market | A stable supply
WQSZ18/26
Fuel oil arm type aerial work platform
The main performance |
◆ PLC control system |
◆ Real-time monitoring of vehicle running status |
◆ Two - or four-wheel drive driving system |
◆ Arm length and Angle sensor protection |
◆ Driving mobile alarm system |
◆ Full scale joystick control, removable console |
◆ The platform moves in low speed mode when lifting |
◆ Full scale console lifting/equipment walking |
◆ Level sensor, always put safety first |
◆ 360 degree continuous chassis rotation |
◆ The working platform can be rotated |
◆ Anti-rust painting process |
◆ Imported standard, to ensure superior quality |
◆ Open engine tray for easy maintenance |
◆ Compact design with small turning radius |
◆ Single hand proportional linear operating system |
◆ Convenient for forklift and crane handling |
The standard configuration |
◆ Emergency stop button |
◆ Tilt protection system |
◆ The whole journey by oneself |
◆ Fault alarm system |
◆ Overload sensor |
◆ Emergency descent protection |
◆ Intelligent proportional control |
◆ Tubing explosion-proof system |
◆ Amber flashing light |
◆ Automatic brake system |
◆ Accurate timer |
SPECIFICATION | ||
Specifications | GTSZ18 | GTSZ26 |
Safe working load | 250kg | 250kg |
Maximum number of workers | 2 | 2 |
A highly | ||
Maximum working height | 19.8m | 28m |
Maximum platform height | 17.8 m | 26 m |
The equipment size | ||
The whole machine width | 2.5m | 2.75m |
The whole machine length | 10m | 12.5m |
The machine is highly | 2.8m | 3.1m |
Main platform size | 1.8m x 0.9m | 1.8m x 0.9m |
Table (bucket) can rotate Angle | 90° | 90° |
Machine rotation Angle (continuous) | 360° | 360° |
The working arm enlarges the working radius | 15.48 m | 18 m |
Fluctuation Angle of working arm | -12° ~73° | -12°~71° |
Turning radius | ||
The inner diameter | 5m | 5.5m |
The wheelbase | 2.5 m | 2.8m |
The running speed | ||
Platform lift time | 60s | 60s |
Platform descent time | 45s | 45s |
Rate of growth (flat speed) | 4.8km/h | 5km/h |
Driving speed (low speed) | 1km/h | 1.2km/h |
Drive system | Four-wheel drive | Two wheel drive |
Climbing ability | 17° | 17° |
Maximum operating Angle | ||
On both sides of the | 3° | 3° |
Before and after | 3° | 3° |
Tire | ||
Traceless solid rubber | 82 cm | 93 cm |
Electrical system | ||
voltage | 24V | 24V |
The engine | Water-cooled diesel engine | Water-cooled diesel engine |
Other | ||
Maximum pressure of hydraulic system | 27 MPa /20MPa | 27 MPa /20MPa |
The machine ADAPTS to ambient temperature | -18℃ ~ 43℃ | -18℃ ~ 43℃ |
Maximum wind speed gusty or constant | 6级 | 6级 |
Job dB | <87dB(A) | <87dB(A) |
The weight | 12800kg | 15500kg |
Maximum allowable wind speed | 12.5m/s | 12.5m/s |